However, high mechanical potato peeler precautions when using 1 power, betel washing and peeling machine image, turn on the switch, a thin barrel and the rotating barrel view arrow mark is consistent, if not, areca peeling machine cleaning action, The three in the power supply, any two exchange after viewing. 2. Before starting the machine, add 5-8 pounds of potatoes for the best, then the amount of water, cover tightly, the start switch. 3. When the machine is running two minutes to check the situation peeling potatoes, if off the net, open barrel door, start switch, potatoes from the stripper plate automatic unloading bucket door. 4. During use, if you have any trouble, please cut off the power after checking. 1 Before the machine running, add the potatoes from the flap 10 type peeling machine every 5-8 kg is appropriate; 30-type peeling machine per 15-25 kg is appropriate. 2 open water switch, flush to the barrel, into the water properly adjusted, the cylinder cover pressed, the start switch. 3 machines for about two minutes or so, turn off the power switch and the water switch, depending on the potato peeling, the skin if the potatoes have been off the net, areca peeling machine cleaning technology, put away in a cylinder filled potatoes dustpan below the container, open the discharge door , turn on the power switch, the potatoes in the rotation of the dial trays, automatically excluded from the cartridge door. 6.4 Continuous off about five times or wash the potatoes after each use, clean the Oriental areca peeling machine, the rotating part of the bottom of the cylinder will accumulate potato skins and dirt, then remove the cylinder cover, make dial trays, rinse, Then once installed. When taking cylinder cover, the first side of the retainer filed more effort; when you install the first tilt into the side of the retainer cap, a little harder in the cap is pressed into the other side of the retainer, the cartridge cover when this work is not easy from the top.